Our Panels

Explore our manufactured control panels, automation systems, electrical assemblies and fire-protection panel builds.

Panel type 01

MCC & PCC panels

Motor Control Centres (MCC) and Power Control Centres (PCC) form the backbone of most plant electrical systems we build. An MCC brings the starters, contactors, overload relays and protection devices for a group of motors into one compartmentalised enclosure, so every motor on a line can be started, stopped and protected from a single location. A PCC sits a step upstream of that — it takes incoming power from the transformer or main supply and distributes it onward, safely, to the MCCs and other panels across the plant.

Multi-cabinet MCC panel bank MCC / PCC
MCC panel row in production MCC / PCC
Three-cabinet MCC panel with meters MCC / PCC
White MCC cabinets MCC / PCC
Freestanding MCC enclosure MCC / PCC
Tall MCC panel enclosure MCC / PCC
Four-door MCC panel row MCC / PCC
MCC switch bank in factory setting MCC / PCC
Panel type 02

PLC-based control panels

This is where our automation work shows most directly. Each control panel is built around a PLC (or relay logic) core that reads inputs from sensors and switches, and drives outputs like contactors, indicator lamps and valves in response. Every panel is wired and labelled to the specific process it will run — a single machine or a full production line — with HMI or SCADA screens added wherever an operator needs visibility into what's happening.

PLC-based control panel with mimic diagram and status lamps Control panel
Control panel with meters and switches Control panel
Control panel with indicator lamps Control panel
Control panel with indicator lamps Control panel
Grey control panel with switches Control panel
Wide control panel with multiple switches Control panel
Control panel with orange wiring detail Control panel
Open control panel showing internal wiring Control panel
Control panel bank with switches Control panel
Control panel installed on factory floor Control panel
Panel type 03

Flameproof panels

Flameproof panels are built for areas where flammable gases, vapours or dust may be present. Rather than trying to guarantee a spark never occurs inside the enclosure, a flameproof design accepts that an internal arc is possible and is engineered so the enclosure itself contains it — cooling any escaping gas below its ignition temperature before it can reach the surrounding atmosphere.

Red flameproof control panel Flameproof
Open flameproof panel showing dense wiring Flameproof
Bright red flameproof panel, doors open Flameproof
Panel type 04

Fire hydrant & fire pump control panels

This is one of the most safety-critical panels in any plant. Its job is to start the jockey, main electric, and diesel standby pumps automatically the moment system pressure drops, and keep water flowing to hydrants and sprinklers no matter what else on-site fails. These panels are built around one rule: the pump has to run, and it has to be hard to stop accidentally.

Red fire pump and hydrant control panel enclosure
Fire pump control panelFront enclosure and control layout
Red fire protection control panel
Fire protection panelIndustrial fire-control enclosure
Red control panel with internal components
Panel build detailInternal control and protection components
Panel type 05

Instrumentation panels

Instrumentation panels bring together the process instruments — pressure, temperature, level and flow devices — that keep a plant's control loops accurate. Each one gives operators a single, clearly labelled point to read and calibrate every signal in a section of the plant.

Instrumentation panel with analogue meters Instrumentation
Instrumentation panel with digital displays Instrumentation
Instrumentation and control panel Instrumentation

Need a panel built to your specification?

Share your drawings or requirement and we'll get back with a design and quote.

Request a panel quote